User Manual of Explosion-Proof Bullet Camera
6
Network
Camera
Network
Cable
Router with Static IP
PC
Network
Cable
Network
Cable
Internet
Figure 2-4
Accessing the Camera through Router with Static IP
Connecting the network camera with static IP directly
You can also save the static IP in the camera and directly connect it to the internet without using
a router. Refer to
Section 2.1.2
for detailed IP address configuration of the camera.
Network
Camera
PC
Network
Cable
Network
Cable
Internet
Figure 2-5
Accessing the Camera with Static IP Directly
2.2.2
Dynamic IP Connection
Before you start:
Apply a dynamic IP from an ISP. With the dynamic IP address, you can connect the network
camera to a modem or a router.
Connecting the network camera via a router
Steps:
1.
Connect the network camera to the router.
2.
In the camera, assign a LAN IP address, the subnet mask and the gateway. Refer to
Section
for detailed LAN configuration.
3.
In the router, set the PPPoE user name, password and confirm the password.
For your privacy and to better protect your system against security risks, we strongly
recommend the use of strong passwords for all functions and network devices. The
password should be something of your own choosing (using a minimum of 8 characters,
including upper case letters, lower case letters, numbers and special characters) in order
to increase the security of your product.
Proper configuration of all passwords and other security settings is the responsibility of
the installer and/or end-user.
