ES-50X Series Manual —
P/N LS10129-000FL-E:D 4/26/2021
57
Master Programming Level
Programming
Description
The Description selection allows the programmer to enter additional information about the detector currently
being programmed. This information will be displayed as part of the device label on the display. Pressing
2
while viewing Edit Detector Screen #5 will cause the following screen to be displayed:
A flashing cursor will appear at the first asterisk to the left. The programmer can enter additional descriptive information about the device
being programmed. This information will appear on the display along with the standard device label information.
A maximum of 20 characters (including spaces) can be entered. To enter alphanumeric characters from the keypad, repeatedly press the
appropriate key until the desired character is displayed in the first position. For example, to enter the letter
B
, press the
2
(ABC) key three
times to toggle through the characters
2
,
A
and
B
. Press the right arrow key to move the cursor one position to the right and repeat the process
to enter the next character. To enter a space, press the
* (QZ)
key four times until a blank appears in the desired position. When all characters
have been entered, press the Enter key to store the information. The display will return to the Edit Detector Screen #5, displaying the new
information at the bottom of the screen.
Module Programming
Pressing
2
, while viewing Point Program Screen #2, will allow the programmer to add, delete or change the pro-
gramming of an addressable module. The following screen will be displayed by the control panel:
Add Module
Pressing
1
while viewing the Modules Screen will display the following screen which allows the programmer to add a new module address
to programming:
A flashing cursor will appear in the position of the first asterisk to the left. The programmer keys in the three digit module address, such as
005
.
When the last digit is keyed-in, the following screen will be displayed:
Pressing
1
for Control Module,
2
for Wireless Control Module,
3
for Monitor Module, or
4
for Wireless Monitor Module will cause the fol-
lowing screen to be displayed:
The programmer can continue adding modules by pressing the
ESC
or left arrow key which will return the display to the Add Module Screen
#1.
EDIT DETECTOR
1=NOUN/ADJECTIVE
2=DESCRIPTION
Edit Detector Screen #5
DESCRIPTION 1D002
NOUN-ADJECTIVE
44444444444444444444
Adjective/Noun Screen
POINT PROGRAM
SELECT TYPE
1=DETECTOR
2=MODULE
Point Program Screen #2
MODULES
1=ADD
2=DELETE
3=EDIT
Modules Screen
ADD MODULE
ENTER MODULE#
444
Add Module Screen #1
ADD MODULE
1=CON 3=MON
2=CON:WL 4=MON:WL
Add Module Screen #2
ADD MODULE
MODULE# 005
IS ADDED (WIRELESS)
Add Module Screen #3