Honeywell FF-SRS5988 Instructions For Use Manual Download Page 13 | Manualshive

Page: 13 / 13

Honeywell FF-SRS5988 Instructions For Use Manual Download Page 13

Honeywell Cometa
European Photoelectric Center
21, Chemin du Vieux Chêne
38243 Meylan Cedex - FRANCE

107018-04 EN FR26 GLO 1198 Printed in Germany

13

WARRANTY AND REMEDY

Honeywell warrants goods of its manufacture as

being free of defective materials and faulty
workmanship. Contact your local sales office for
warranty information. If warranted goods are
returned to Honeywell during the period of coverage,
Honeywell will repair or replace without charge those
items it finds defective. The foregoing is Buyer’s
sole remedy and is in lieu of all other warranties,
expressed or implied, including those of
merchantability and fitness for a particular
purpose.

While we provide application assistance,

personally and through our literature and the
Honeywell Website, it is up to the customer to
determine the suitability of the product in the
application.

Specifications may change at any time without

notice. The information we supply is believed to be
accurate and reliable as of this printing. However,
we assume no responsibility for its use.

SALES AND SERVICE

For application assistance, current specifications,

pricing or name of the nearest Authorized
Distributor, contact a nearby sales office or call:

TELEPHONE
1-800-737-3360 Canada
+ 33 (0) 4 76 41 7200 France
+ 49 (0) 69 8064 444 Germany
1-815-235-6847 International
+ 44 (0) 161 251 4079 UK
1-800-537-6945 USA

FAX
+ (33) 76 41 72 56 France
1-815-235-6545 USA

INTERNET
http://www.honeywell.com/sensing/
[email protected]

ORDER GUIDE

FF-SRS 5988

❑

P= 120Vac / 24Vdc
R = 230Vac / 24Vdc

«
...
11
12
13

Summary of Contents for FF-SRS5988














Reviews:

No comments