Honeywell EQUIP HD4MDIH, User Manual

Page: 27 / 80

HD4MDIH/X EQUIP Series True Day/Night Rugged IP Network Camera User Guide
Document 800-07496 Rev A 27
12/10
Figure 2-8 Normal Alarm States
Connect external devices such as sirens or flashing lights to the alarm output connector to
signal users that an alarm is activated. See
Figure 2-9 for alarm connection.
Figure 2-9 Alarm Connection
The alarm output can be configured to provide normally open or normally closed contacts
(see
Device Settings on page 51 to configure the alarm output). Contacts will be rated for
12 VDC @ 0.5 A.
Connecting to a Network via CAT5 Ethernet Connector
The main video connection for your camera is made through the Ethernet network
connection. Connect the CAT5 Ethernet connector (see
Figure 2-6 on page 25 ) to your
network using an Ethernet (10Base T, 100Base TX) cable.
Note You can connect your camera to a network or connect it directly to a PC or
laptop using a crossover cable between the camera and the PC or laptop.
Step 8. Sealing the wiring
To prevent moisture from entering the housing, you should apply the appropriate sealant
around the conduit entry and mounting screws.
Normally closed Normally opened
+
–
In
Audio
Alarm
Out
+ 