Honeywell EQUIP HD4MDIH, User Manual

Page: 25 / 80

HD4MDIH/X EQUIP Series True Day/Night Rugged IP Network Camera User Guide
Document 800-07496 Rev A 25
12/10
Figure 2-6 Wiring Connections Shown on Board
Caution For secure installations, surface-mounted cables should be protected
by plastic or metal cable covers.
Caution Installation must be performed by a qualified electrician. The power
wire size for the distance and the number of cameras must be
determined to maintain 24 VAC at each camera.
Caution Connect power either from a 24 VAC source or a CAT5 Ethernet
connector (PoE); never both at the same time.
Connect Audio and Alarms
Locate the eight-pin green connector that was shipped with your camera and make all the
necessary connections.
Figure 2-7 Audio and Alarm PINs
Local video out
Audio: Input / Output
Alarm: Input / Output
(see
Connecting Alarms , page 26 )
RJ45 Ethernet Connector
(see
Connecting to a Network via
CAT5 Ethernet Connector , page 27 )
This is also the connection for
Power over Ethernet (PoE 802.3af)
Power 24 VAC
1 2
3
4 5 6
7 8