38
Handling
SMB System C
5. Join the Steel Mesh
Barriers by fitting the other
clamp on the Steel Mesh
Barrier Hinge in the same
way on to the end of the
other Steel Mesh Barrier.
Note that the return on the
bottom of the second Steel
Mesh Barrier will need to
sit on top of the return on
the first.
6. Fit the other Steel Mesh
Barrier Hinge between the
mesh just above the toeboard.
WARNING!
The Steel Mesh Barrier Hinge can
be placed in the middle of a Steel
Mesh Barrier, not just at the end.
The Steel Mesh Barrier Hinge can
also be used to link together the
Steel Mesh Barrier Stair at its ends.
The connection of the mesh in
a corner can in some situations
replace a Safety Post so that only
one Safety Post is needed in the
corner, check with Combisafe under
which circumstances this is allowed.