37
SMB System C
Handling
Steel Mesh Barrier Hinge 3225
1. Fit the Steel Mesh Barrier Hinge at the top of a Steel
Mesh Barrier, as high as possible. Loosen the bolt and
turn the clasp 90 degrees and push it through the
opening in the mesh.
2. Turn the clasp back and
tighten it in, checking that the
U-section on the clasp aligns
of the flanges on the Steel
Mesh Barrier Hinge base’s
U-section.
3. Check that the raised surface on the Steel
Mesh Barrier Hinge is positioned in between
the vertical rods.
4. Tighten the nut.
