TITLE
Model
DOCUMENT NO.
PAGE
CN70 Service Work Instructions
CN70A,CN70E
SWICN70-000
Page
9
of
45
SWA bottom housing
SWA straight imager window
Standard angled window
Removal
1. Remove the stylus from its storage slot in the back cover.
2. Remove the two plugs that cover a screw at each side of the battery compartment.
3. Remove 8 screws (10 for a CN70E) with a T10 Torx driver. Discard the screws. The screws have a one time use
seal and new screws must be used when reinstalling the bottom housing.
CN70A – 8 screws
CN70E – 10 screws
Continued on next page…
