TITLE
Model
DOCUMENT NO.
PAGE
CN70 Service Work Instructions
CN70A,CN70E
SWICN70-000
Page
6
of
45
2. On a CN70A push the webbing through the slot in the battery latch until the retaining pin is exposed. A small
straight tipped screwdriver may be useful here since the pin fits tight in the battery latch. Remove the retaining pin
and slide the webbing out of the slot in the battery latch. For a CN70E unclip the lower end of the strap from the
bottom housing.
CN70A
CN70A
CN70E
Installation is reverse order of removal. When re-installing the pin in a CN70A be sure to give the handstrap webbing
a good pull to seat the pin back into the battery latch.
Push retaining pin
out of battery latch
