Honeywell 3-144, Installation Manual

Page: 55 / 90

Galaxy 3 Series Installation Manual
4-5
Keypad Operation
The number keys are used to enter the Personal Identification Number
(PIN) which identifies users to the Galaxy and permits access to the system
options. The PIN Code is a 5 or 6 digit number.
Self Diagnostics
The keypad has a self diagnostic feature that is used to test the operational status of the inputs and outputs of
the keypad.
The test is started by disconnecting the power from the keypad, then reapplying the power while pressing the
ent key. The test routine commences immediately. Each test last approximately four seconds. The test is
terminated by removing the power.
•
Keypad address is displayed
• Keypad buzzer is activated and a bell symbol is displayed.
• Power LED is illuminated and an a.c. ( ) and LED ( ) symbol is displayed.
• Keypad keys are displayed. Each key press is confirmed by the buzzer sounding and the key display
being highlighted.
• To return keypad to operational mode remove and reapply power.
Keypad/KeyProx Operation
Number Keys
Table 4-4. Default Codes
The number keys are also used, once access to the system has been gained, to select and modify options.
View Keys
Enter Key
These keys are used to initiate the setting of the Galaxy
Pressing the
A or B key immediately after a valid PIN has been entered starts
one of the routines for setting the system. The A key initiates the full setting of
the Galaxy. The B key starts the part setting routine.
Once the system has been successfully accessed the A key can be used to
step forward through the Galaxy menu options and the B key to step back-
wards.
The
A and B keys can also be re-programmed for different functions.
The ent key is used to:
• Access the menu options
• Confirm the programming selections
e d o C t l u a f e D
r e e n i g n E 3 3 2 2 1 1
r e s U e t o m e R 0 1 2 3 4 5
r e g a n a M r e t s a M 5 4 3 2 1
n o it a s ir o h t u A 1 2 3 4 5
1 2 3
4 5 6
7 8
9
0
A
B
ent