COMPONENT MAINTENANCE MANUAL
15-0705
25
Honeywell Control Source Drawing (HCSD) shows the Honeywell part number for
the part in the PART NUMBER column and is fully interchangeable.
26
HAZARDOUS MATERIAL identifies parts that can have dangerous effects.
27
ESDS identifies parts that are electrostatic sensitive.
28
MOISTURE SENSITIVE identifies parts that are moisture sensitive.
(f)
If applicable, refer to REPAIR (PGBLK 33-30-15-6000) for description of wire, sleeving,
and lacing given in this DPL.
(8)
The effectivity code column.
(a)
The effectivity code identifies the different configurations of the top assembly in each IPL
figure.
(b)
If this column is empty, the part is used in all configurations of the top assembly for
that IPL figure.
(c)
If this column has a letter code in it, the part is only used in the configuration of the top
assembly that has the same letter code.
(d)
If this column has more than one letter code, the part is used in each top assembly with
the same letter codes.
(e)
If a comma separates the column entry (A, C), the other codes do not apply. For
example, a component coded “A, C” is applicable for Codes A and C only and not
applicable for Code B.
(f)
If a dash separates the column entry (A-C), the other codes do apply. For example, a
component coded “A-C” is applicable for Codes A, B, and C.
(9)
The units per assembly column.
(a)
The units per assembly column show the quantity of parts necessary in the assembly of
one next higher assembly. The letters AR in this column show “as required” items and
refer to bulk items or adjustable quantity items, such as shims or spacers. The letters RF
are used to show an item that is shown in another area with a quantity.
EFFECTIVITY
ALL
33-30-15
Page 10005
30 Mar 2017
© Honeywell International Inc. Do not copy without express permission of Honeywell.
