manualshive.com logo in svg

Honeywell 1152682-2, Component Maintenance Manual With Illustrated Parts List, Page: 99 / 104

Share
Download
Honeywell 1152682-2 Component Maintenance Manual With Illustrated Parts List Download Page 99

COMPONENT MAINTENANCE MANUAL

1152682

Page C-2

                                                                                                                                                                 Oct 27/06

© Honeywell International Inc. Do not copy without express permission of Honeywell.

23-24-02

For more information, contact OPP at:

Office of Pollution Prevention
Ohio Environmental Protection Agency
P.O. Box 1049
Columbus, Ohio 43216-1049
Phone (614) 644-3469
Fax: (614) 728-1245
E-mail: [email protected]

Toxco, Inc.
3200 E. Frontera
Anaheim, CA 92806
Phone: (714) 630-8378
FAX: (714) 630-1014
E-mail: [email protected]

Types: Lithium

Universal Metals and Ores
10 Hartford Ave.
Mount Vernon, NY
Phone: (914) 664-0200
FAX: (914) 699-0026
Contact: David Vollweiler

Types: Nickel-cadmium, nickel-metal hydride, lithium

Waste and Recycling Services
44744 Helm Street
Plymouth, MI 48170
Phone: (734) 397-5801

Types: Alkaline, nickel-cadmium, magnesium, mercury, lithium, 
silver, lead-acid

TABLE C-1.   BATTERY RECYCLERS & DISPOSAL FACILITIES (Cont’d)

Summary of Contents for 1152682-2









































































































Reviews:

No comments