COMPONENT MAINTENANCE MANUAL
1152682
Page 115
Oct 27/06
© Honeywell International Inc. Do not copy without express permission of Honeywell.
23-24-02
17
ELTONPULSE
Output
Momentary contact closure to ground
gives MASTER CAUTION PULSE at
transmission start.
Optional
18
LIGHT
Output
Supplies power to the LED on the
remote panel.
Optional
19
EXTERNAL ON
Input
Used with RESET1 and RESET2 to
sense the position of the remote
panel switch.
Required
20
RESET1
Input
Used with EXTERNAL ON and
RESET2 to sense the position of the
remote panel switch.
Required
21
ELTON3
Output
Contact closure to ground during
TRANSMIT mode. At other times,
open circuit.
Optional
22
RESET2
Input
Used with RESET1 and EXTERNAL
ON to sense the position of the
remote panel switch.
Required
23
BUZZERHI
Output
Pulsed input to buzzer.
Optional
TABLE 103. AIM P/N 1152780-1 CONNECTOR J1 PIN-OUTS
Pin
Pin Label
(I/O)
Description
Requirements
1
A/C Address Bit 1
Input
Bit 1 info from Aircraft Address Bank
(closure to ground/open circuit)
Optional (used with
24-bit DIP switch
module)
2
A/C Address Bit 2
Input
Bit 2 info from Aircraft Address Bank
(closure to ground/open circuit)
Optional (used with
24-bit DIP switch
module)
3
A/C Address Bit 3
Input
Bit 3 info from Aircraft Address Bank
(closure to ground/open circuit)
Optional (used with
24-bit DIP switch
module)
4
A/C Address Bit 4
Input
Bit 4 info from Aircraft Address Bank
(closure to ground/open circuit)
Optional (used with
24-bit DIP switch
module)
5
A/C Address Bit 5
Input
Bit 5 info from Aircraft Address Bank
(closure to ground/open circuit)
Optional (used with
24-bit DIP switch
module)
6
A/C Address Bit 6
Input
Bit 6 info from Aircraft Address Bank
(closure to ground/open circuit)
Optional (used with
24-bit DIP switch
module)
7
A/C Address Bit 7
Input
Bit 7 info from Aircraft Address Bank
(closure to ground/open circuit)
Optional (used with
24-bit DIP switch
module)
TABLE 102. TRANSMITTER UNIT P/N 1152862-2 CONNECTOR J1 PIN-OUTS (Cont’d)
Pin
Pin Label
(I/O)
Description
Requirements