21
Programming the Communicator
General Information
The communicator delivers alarms via the Internet to an AlarmNet central station or via the network,
using cell technology when the Internet is not available.
NOTE
: The communicator requires an AlarmNet 360 account. For new installations, please obtain
the account information from the central station prior to programming this communicator.
For replacement installations, the AlarmNet 360 account is created automatically when the
communicator is registered.
Programming the communicator is done using the AlarmNet 360 website or the AlarmNet 360 Mobile
App.
Using AlarmNet 360
To program the communicator via the website (if you are already signed up for this service), go to:
www.alarmnet360.com
or use the AlarmNet 360 Mobile App. Log in and follow the on-screen
prompts. Please have the following information available when programming the communicator:
•
Primary City ID (two-digit number), obtained from your monitoring station.
•
Primary Central Station ID (two-digit number), obtained from your monitoring station.
•
Primary Subscriber ID (four-digit number), obtained from your monitoring station.
•
Communicator’s MAC ID and MAC CRC number (located on the box and inside the communicator).
When programming is complete,
the communicator must be registered
. See the
Registration
section.
After any programming changes are made to bus-connected control panels, the
communicator must be reset/rebooted (press and hold the Test switch for 10 seconds).
Programming Options
The following is a list of programming options pertinent to this communicator and programmed in
the AlarmNet 360
SETTINGS
menu.
OVERVIEW FIELDS
(Overview fields are programmed when a new account is created in AlarmNet
360)
Communicator MAC
xxxxxxxxxxxx
The MAC ID is found on a label on the communicator and on its carton.
Alarm Reporting Number
xx xx xxxx
Account information is provided by the central station administrator. This field
displays account number, consisting of the City ID, Central Station ID, and
Subscriber ID numbers.
City ID = 01-99; Central Station ID = 01-FE (HEX); Subscriber ID = 0001-9999
Device Type
•
LTEM-PA
•
LTEM-PV
Device Type displays the model number for the communicator being
programmed.
Panel Type
•
VISTA
•
VISTA-20P
•
Interlogix
•
DSC
•
DCM
Panel Type indicates the type of control panel to which the communicator is
connected.
Summary of Contents for LTEM-PA
Page 2: ......
Page 24: ...LTEM P Installation and Setup Guide 20 ...
