Tyre Puncture
u
Removing Wheels
74
Tr
ou
bles
hoo
ting
Installation
1.
Attach the side collars to the wheel.
2.
Position the wheel between the fork legs
and insert the front axle shaft from the
right side, through the wheel hub and
right fork leg.
3.
Tighten the front axle nut.
4.
After installing the wheel, apply the brake
lever several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
NOTICE
When installing the wheel, carefully fit the brake disc
between the pads to avoid scratching them.
Torque:
54 N·m (5.5 kgf·m, 40 lbf·ft).
17 MSX125 (LO CA)-32K26D200.book 74 ページ 2017年2月14日 火曜日 午前10時22分