manualshive.com logo in svg

Honda MSX125 2017, Owner'S Manual

Share
Download
Honda MSX125 2017 Owner'S Manual Download Page 33

28

O

p

er

at

io

n Gu

id

e

Refuelling

Do not fill with fuel above the lower edge of 
the filler neck.

Fuel type: 

Unleaded petrol only

Fuel octane number: 

Your motorcycle is 

designed to use Research Octane Number 
(RON) 91 or higher.

Tank capacity: 

5.7 litres (1.51 US gal, 

1.25 Imp gal)

❙

Refuelling and Fuel Guidelines 

(P9)

Opening the Fuel Fill Cap

Open the lock cover, insert the ignition key, 
and turn it clockwise to open the cap.

Closing the Fuel Fill Cap

!

a

After refuelling, push the fuel fill cap closed 
until it locks.

!

b

Remove the key and close the lock cover.

u

The key cannot be removed if the cap is 
not locked.

Fuel fill cap

Ignition key

Lock cover

Lower edge 
of filler neck

3

WARNING

Petrol is highly flammable and 
explosive. You can be burned or 
seriously injured when handling fuel.

•

Stop the engine, and keep heat, 
sparks, and flame away.

•

Handle fuel only outdoors.

•

Wipe up spills immediately.

17 MSX125 (LO CA)-32K26D200.book  28 ページ  ２０１７年２月１４日　火曜日　午前１０時２２分

Summary of Contents for MSX125 2017













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands