Honda HS1336i, Owner'S Manual

Page: 61 / 144

59
OPERATION
6) Move the main shift lever fully to the
end of the forward slow speed range
slowly and clear the snow.
• When the auger hits against the road
or inclines to a side, adjust the auger
housing position by operating the
auger housing control switch.
• When the snow is small in volume or
light in nature, move the main shift
lever to the high speed side. Perform
minor adjustment of the main shift
lever to stabilize the operating speed if
necessary.
7) After stabilizing the operating speed,
adjust the snow discharge distance by
operating the throttle control lever as
needed.
• Traveling speed will decrease by
increasing the snow discharge
distance, while the speed will increase
by decreasing the snow discharge
distance. Adjust the snow discharge
distance by operating the throttle
control lever as needed.
*For the amount of removed snow, 2nd is the largest.
8) When the drive clutch lever is released,
the auger clutch switch indicator (green)
goes off, both the auger and blower stop
turning, and the snow blower stops
moving.
Turn the auger clutch switch OFF if you
move the snow blower without
performing the snow blowing
operation.
Throttle control lever Engine speed Snow discharge
distance
Snow amount*
Fast range 4th Fast Long Small
3rd
2nd Large
Slow range 1st Slow Short Small
MAIN SHIFT LEVER
SLOW
RANGE
FAST
RANGE
THROTTLE CONTROL LEVER
DRIVE
CLUTCH
LEVER
AUGER CLUTCH SWITCH
31V156250.book 59 ページ ２０２０年１２月２２日 火曜日 午後１時３６分