Honda HS1336i, Owner'S Manual

Page: 71 / 144

69
OPERATION

Intermittent clearing
Follow the steps below when the engine lugs against deep or heavy snow.
1. Operate the main shift lever and move it to the N (neutral) position until
the snow blower recovers the engine speed. (Allow the auger clutch switch
indicator (green) to come on and keep the auger turning.)
2. After the auger is clear of snow and the snow blower recovers the engine
speed, move the main shift lever to the forward slow speed range.
3. Repeat the above steps if engine speed is still reduced.

Clearing in steps
If the height of the snow is greater than the height of the snow blowing
mechanism, remove it in several steps as shown.
1. To ascend the slope:
• Operate the auger housing control switch to raise the auger a little.
2. To dig into the snow:
• Operate the auger housing control switch to lower the auger a little.
• Adjust the skid position as needed (see page 48).
Wait until the auger is
clear of snow.
1st
2nd
3rd
1st 2nd
3rd
31V156250.book 69 ページ ２０２０年１２月２２日 火曜日 午後１時３６分