−
191
Manual Shift (ESP) Mode:
If the Transmission Is Not
Functioning Properly
Taking Care of the Unexpected
If the Battery Is Low (or Dead),
Emergency Gear
Selection & Operation,
Emergency Gear
Selection & Operation,
See
page
.
When the battery is low (or dead):
Turn the ignition switch to the OFF (
) position.
Turn the ignition switch to the ON (
) position.
Press both shift switches and check that they are functioning.
If both switches are functioning, shift into neutral and restart the
engine.
If one or both switches are not functioning, see
page
.
When the engine is stopped and the ignition switch is ON:
Stop the ATV.
Turn the ignition switch to the OFF (
) position.
After the engine stops, turn the ignition switch to the ON (
)
position.
Press both shift switches and check that they are functioning.
If both switches are functioning, shift into neutral and restart the
engine.
If one or both switches are not functioning, see
page
.
When the engine is running:
If one or both shift switches do not function, stop riding your ATV in
the ESP (manual shift) mode. Switch to riding in the AUTO (automatic
shift) mode.
Have your ATV inspected by your Honda dealer.
If the gear position indicator shows ‘‘
’’ or blinks, rock the vehicle
back and forth and make sure the gear position indicator is displayed
properly.
1.
2.
3.
4.
5.
1.
2.
3.
4.
192
192
207
08/05/06 17:33:06 31HP7600 0200
Summary of Contents for FourTrax Rancher AT 2009
