−
−
9 lbf·ft (12 N·m , 1.2 kgf·m)
18 lbf·ft (25 N·m , 2.5 kgf·m)
3.8 US qt (3.6 )
118
Engine Oil & Filter
Servicing Your Honda
Improper disposal of drained f luids is harmf ul to the environment.
Add Engine Oil:
Reinstall the oil filter cover, making sure the bolts are tightened to the
specified torque:
Pour the drained oil into a suitable container and dispose of it in an
approved manner (page
).
Check that the drain plug sealing washer is in good condition. If
necessary, replace the sealing washer.
Reinstall the oil drain plug and tighten it to the specified torque:
Fill the crankcase with the recommended grade oil approximately:
Stop the engine, wait 2
3 minutes and check the oil level. Make sure
the oil is between the upper and lower level marks on the dipstick. If
necessary, add more oil but do not overfill.
Reinstall the oil filler cap and dipstick.
Check that there are no oil leaks.
Install the left side cover.
Install the right side cover.
Install the seat.
If a torque wrench is not used for installation, see your Honda dealer as
soon as possible to verify proper assembly.
Start the engine and let it idle for 3
5 minutes.
1.
2.
3.
4.
5.
6.
7.
8.
9.
4.
5.
182
10.
08/05/06 17:23:32 31HP7600 0127
Summary of Contents for FourTrax Rancher AT 2009
