Honda FourTrax Rancher AT 2009, Owner'S Manual

Page: 35 / 265

LEFT HANDLEBAR
(1) start button
(2) engine stop switch
(1)
(2)
START
OFF
RUN
27
Start Button
Engine Stop Switch
Controls & Features
Instruments & Controls
Starting Procedure,
The start button ( ) is used for starting the engine. Pushing the button in
starts the engine. See
page .
The engine stop switch ( ) is used to stop the engine in an emergency.
To operate, slide the switch to the OFF (
) position. The switch must
be in the RUN ( ) position to start the engine, and it should normally
remain in the RUN ( ) position even when the engine is OFF.
When the start button is pushed, the starter motor will crank the engine.
The starter motor will not operate if the engine stop switch is in the OFF
(
) position when the start button is pushed.
If your ATV is stopped with the ignition switch ON ( ) and the
engine stop switch OFF ( ), the battery will discharge. Turn the
ignition switch OFF ( ) to prevent battery discharge.
1
2
64
０８／０５／０６ １７：１２：１４ ３１ＨＰ７６００ ００３６