50
SERVICING YOUR GENERATOR
ENGINE OIL CHANGE
Drain the oil while the engine is warm to assure rapid and complete
draining.
1. Place a suitable container below the engine to catch the used oil,
and then remove the oil filler cap/dipstick, 12×15 mm drain plug,
and sealing washer.
2. Allow the used oil to drain completely, and then reinstall the 12×15
mm drain plug and a new sealing washer. Tighten the plug securely.
3. With the generator in a level position, fill to the upper limit mark on
the dipstick with the recommended oil (see page 51).
Maximum oil capacity:
1.2 US qt (1.1 L)
4. Reinstall the oil filler cap/dipstick securely.
Wash your hands with soap and water after handling used oil.
Improper disposal of engine oil can be harmful to the environment. If
you change your own oil, please dispose of it properly. Put it in a
sealed container, and take it to a recycling center. Do not discard it in a
trash bin, dump it on the ground, or pour it down a drain.
SEALING
WASHER
(Replace)
12×15 mm
OIL DRAIN PLUG
OIL FILLER CAP/DIPSTICK
UPPER LIMIT
31Z238100.book 50 ページ ２０１４年１２月５日 金曜日 午後４時２１分
Summary of Contents for EB4000
Page 93: ...91 MEMO 31Z238100 book 91...
Page 94: ...92 MEMO 31Z238100 book 92...
