Honda Cr-v 2007 Owner'S Manual Download Page 188

Page: 188 / 552

You can set the super locking with
the remote transmitter. To set the
super locking, push the LOCK
button twice within 5 seconds.

The super locking will not set if any
door or the tailgate is not fully closed.
It will be set even if the bonnet or
any window is open.

See page

for information on the

super locking.

Avoid dropping or throwing the
transmitter.

Protect the transmitter from
extreme temperature.

Do not immerse the transmitter in
any liquid.

If you lose a transmitter, the
replacement needs to be
reprogrammed by your dealer.

To cancel the super locking, push
the UNLOCK button on the remote
transmitter, or unlock the driver’s
door with the key.

180

Super Locking
(For some types)

Remote Transmitter Care

Remote Transmitter

Instruments and Controls

183

If there are persons inside the
vehicle with the super
locking set, they cannot
unlock the doors from the
inside.

Make sure there is no person
inside the vehicle before
setting the super locking.

06/09/13 17:17:40 32SWA600_188

Summary of Contents for Cr-v 2007









































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cr-v 2007

Reviews:

Related manuals for Cr-v 2007

Brands by name

Popular brands

Honda Cr-v 2007, Owner'S Manual

Search results

Summary of Contents for Cr-v 2007

Reviews:

Related manuals for Cr-v 2007

Brands by name

Popular brands