Honda Cr-v 2007, Owner'S Manual

Page: 91 / 552

This indicator has two functions:
It comes on when you turn the
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. A beeper
sounds if you drive with the
parking brake not fully released.
Driving with the parking brake not
fully released can damage the
brakes and tyres.
If it remains lit after you fully
release the parking brake while
the engine is running, or if it
comes on while driving, there
could be a problem with the brake
system. For more information, see
page
.
You will also see the symbol
‘‘
,’’ or this symbol with a
‘‘RELEASE PARKING BRAKE’’
message in the multi-information
display (see page
).
You will also see the symbol
‘‘
,’’ or this symbol with a
‘‘CHECK SYSTEM’’ message in
the multi-information display (see
page
).
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position, and when the ignition
switch is turned to the START (III)
position. If it comes on at any other
time, there is a problem with the
ABS. If this happens, have your
vehicle checked at a dealer. With
this indicator on, your vehicle still
has normal braking ability but no
anti-lock function. For more
information, see page
.
You will also see the symbol ‘‘ ,’’
or this symbol with a ‘‘CHECK
SYSTEM’’ message on the multi-
information display (see page
).
1.
2.
117
512
122
125
366 On vehicles with multi-information
display
On vehicles with multi-information
display
On vehicles with multi-information
display
Parking Brake and
Brake System Indicator Anti-lock Brake System
(ABS) Indicator
Instrument Panel Indicators
Instruments and Controls
86
06/09/13 18:26:41 32SWA600_091