Honda Cr-v 2007, Owner'S Manual

Page: 98 / 552

This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. It also comes on as a
reminder that you have turned off
the collision mitigation brake system
(CMBS) by pressing the CMBS off
switch (see page
).
The CMBS indicator also comes on
if dirt or other debris blocks the
radar sensor in the front grille.
When you clean the radar sensor,
the indicator should go off the next
time you turn the ignition switch to
the ON (II) position.
If the indicator comes on at any
other time, there is a problem with
the CMBS. You will also see the
symbol ‘‘
’’ or this symbol with a
‘‘CHECK SYSTEM’’ message on the
multi-information display. If this
happens, take your vehicle to a
dealer, and have it checked. For
more information, see page
.
When this indicator is on, the CMBS
is not working.
The left or right turn signal indicator
blinks when you signal a lane change
or turn. If an indicator does not blink
or blinks rapidly, it usually means
one of the turn signal bulbs is
burned out (see page
). Replace
the bulb as soon as possible, since
other drivers cannot see that you are
signalling.
When you press the hazard warning
button, both turn signal indicators
and all turn signals on the outside of
the vehicle will flash.
Your vehicle has the one-push turn
signal feature to signal a lane change
easily (see page
).
371
368
432
164
On vehicle with the adaptive cruise
control system
Instrument Panel Indicators
Instruments and Controls
Collision Mitigation
Brake System (CMBS)
Indicator
Turn Signal and Hazard Warning
Indicators
93
06/09/13 18:27:50 32SWA600_098