44 |
| 45
VEHICLE CONTROLS
VEHICLE CONTROLS
Power Window Operation
The power windows can be opened and closed when the power mode is on by
using the switches on the doors. The switches on the driver’s side can be used
to open and close all the windows.
n
Automatic Operation
To open:
Push the switch down firmly.
To close:
Pull the switch up firmly.
The window opens or closes
completely. To stop the window at any
time, push or pull the switch again
briefly.
Driver’s
Window
Switch
Front Passenger’s
Window Switch
Rear Passenger’s
Window Switches
Power
Window
Lock Button
Indicator
n
Manual Operation
To open:
Push the switch down lightly.
To close:
Pull the switch up lightly.
release the switch when the window reaches the desired position.
n
Power Window Lock
Push in the power window lock button so only the driver’s window can be
operated.
Closing a power window on someone’s hands or fingers can cause
serious injury.
Make sure your passengers are away from the windows before closing
them.
WARNING
Interior and Exterior Lights
operate interior and exterior lights when the power mode is on or off.
n
Brightness Control
Adjust instrument panel brightness
when the power mode is on.
To brighten:
Press the (+) button.
To dim:
Press the (-) button.
A beep sounds when the brightness
reaches its minimum or maximum.
The instrument panel brightness
does not change when the headlights
come on.
(
+
Button
(
-
Button
n
Interior Lights
Change the interior light settings
using the switch on the ceiling.
ON position:
Interior lights remain on.
Door-activated position:
Interior
lights come on when any of the
doors are opened, the driver’s door is
unlocked or the power mode is turned
off.
Off
On
Door Activated Position
OFF position:
Interior lights remain off.
Map lights:
Press the map lights to turn on or off.
