3. Look for the uprighting procedure label (1)
(on the left side when capsized, viewed
from the rear).
4. Make sure the area is clear of people and
passenger, then grab the intake grate (2)
with both hands and pull the PWC over
toward you while pushing down on the side
of the hull nearest you.
5. As your PWC rolls over, remove your
hands from the intake grate and grab the
outside bumper (3).
6. Get out of the way as the PWC completes
its rotation.
7. Remove the seat, rear cover, and the rear
tray and check for flooding of engine
compartment.
–
If the engine compartment is badly
flooded, do not start the engine, and have
someone tow your PWC to land. Drain
water from the engine compartment, then
take your PWC to your Honda PWC
dealer.
–
If the engine compartment is not badly
flooded, go to step 8.
8. Insert the lock clip in the engine stop
button/switch.
9. Push the start button.
If the engine starts, you can continue
riding.
If the engine does not start, do not attempt
repeated starts. Get towed to shore. Refer
to
If Your PWC Is Submerged
See your Honda PWC dealer immediately
to avoid possible severe engine damage.
If You Capsize
Taking Care of the Unexpected
193
10.
11.
Summary of Contents for AQUATRAX R-12X
