Servicing Your Honda
138
Lubrication
To lubricate and rustproof the inside of the
throttle body, proceed as follows after
confirming that the engine is stopped and
cool.
1. Disconnect the maintenance joint (1).
2. Insert the spray nozzle of a water-
displacement corrosion-proof lubricant
(without Teflon or molybdenum additives,
such as CRC 6-56 or an equivalent) into
joint hole A (2).
3. Open the throttle fully.
4. Spray the lubricant into joint hole A (2) for
3 seconds.
5. Operate the throttle lever slowly, from fully
ON to fully OFF, 3 times.
6. Repeat the step 2-5 again.
7. Perform the same lubrication procedure for
joint hole B (3).
8. Spray the lubricant to the maintenance
joint threads and the O-ring.
9. Reconnect the maintenance joint and make
sure it tightened securely.
Summary of Contents for AQUATRAX R-12X
