Downshifting can help slow your motorcycle,
especially on downhills. However, downshifting
when engine rpm is too high can cause engine
damage.
To prevent transmission damage, do not coast or
tow the motorcycle for long distances with the
engine off.
NOTICE
NOTICE
Basic Operating Instructions
15
Shifting Gears
1. After the engine has been warmed up, the
motorcycle is ready for riding.
2. While the engine is idling, pull in the clutch
lever and depress the shift lever to shift into
1st (low) gear.
3. Slowly release the clutch lever and at the
same time gradually increase engine speed by
opening the throttle. Coordination of the
throttle and clutch lever will assure a smooth
positive start.
When moving off from a standing start, be careful
not to use too much throttle. The motorcycle may
"wheelie" over backwards.
4. When the motorcycle attains a moderate
speed, close the throttle, pull in the clutch
lever and shift to 2nd gear by raising the shift
lever.
5. This sequence is repeated to progressively
shift to 3rd, 4th, 5th, and 6th, (top) gear. Raise
the shift lever to shift to a higher gear and
depress it to downshift. Each stroke of the
shift lever engages the next gear in sequence.
The shift lever automatically returns to the
horizontal position when released.
NOTICE
CR85/000-023 05.6.8 2:19 PM ページ 15
Summary of Contents for 85RB EXPERT 2006
Page 1: ...2006 Honda CR85 85RB EXPERT OWNER S MANUAL COMPETITION HANDBOOK CR85 000 023 05 6 8 2 18 PM a...
Page 14: ...10 Before Riding CR85 000 023 05 6 8 2 19 PM 10...
Page 108: ...104 Tips CR85R 099 104 05 6 8 2 28 PM 104...
Page 122: ...118 Technical Information Wiring Diagram CR85R 105 130 05 6 8 2 29 PM 118...