20
Sys
tem
S
e
tup
Start-up
The navigation system starts automatically when you turn the ignition to
ACCESSORY (I) or ON (II). At start-up, the following Confirmation screen is displayed.
1.
Move
y
to select
CHANGE
LANGUAGE
.
If you do not need to change
the system language, proceed to
step 3.
2.
Rotate
i
to change the system
language. Press
u
.
3.
Press
u
to select
OK
.
Your current position is
displayed on the map screen.
If you have set any calendar
event reminders, they are
displayed. Proceed to step 4.
1
Start-up
If the navigation system loses power at any time,
you may be prompted for the 5-digit security
code.
2
System Initialization
P. 222
At start-up, the driver’s fob key is automatically
detected and the address book settings, setup
preferences, wallpapers, and audio settings for
that driver (e.g., Driver 1) are loaded.
Message Icon
If you have any unread messages, the
(message) icon is displayed at the bottom left
side of the screen.
2
AcuraLink® Messages
P. 194
You can change the system language at any
time.
2
Language
P. 31
“OK” on the Confirmation screen cannot be
activated by voice. If you do not press
u
within
30 seconds, the screen goes blank (or displays
your wallpaper screen) and you cannot use voice
commands. Press any navigation or voice control
button to continue.
TSX_KA-31TL1820.book 20 ページ 2011年6月24日 金曜日 午後3時43分