4 of 10
AII 20447 (9908)
© 1999 American Honda Motor Co., Inc - All Rights Reserved.
CLIP
(LARGE)
CLIP
LEFT KICK PANEL
TAB
SELF-TAPPING
SCREWS
UPPER STEERING
COLUMN COVER
LOWER END
5.5 mm DRILL
MARK
UPPER STEERING
COLUMN COVER
30 mm
CENTER OF
COLUMN COVER
LED
UPPER STEERING
COLUMN COVER
PUSH NUT
6.
Remove the left kick panel (two clips, and slide back
while pulling its lower end inside).
7.
Remove the upper steering column cover (three
screws and six clips).
Installing the LED
8.
Measure and mark the upper steering column cover
removed in step 7 and lightly center-punch the mark.
9.
While wearing eye protection, drill a 5.5 mm hole
through the center-punched mark. Remove all burrs.
10. Route the terminal ends of the LED through the hole
you just drilled, and secure the LED with the push
nut. Install the push nut securely.
