background image

BSR-

6155

   

Page 1 from 4

921615500_09_003

GENERAL

The user have to read carefully the following instructions, in order to be properly informed and keep them 
for future use.

The  BSR-6155  is  an  analogue  addressable  smoke  detector  which  integrates  the  function  of  optical 
smoke detection and it can work with any fire panel supports Olympia A Protocol. It can be adjusted to 
detect multiple levels of smoke offering flexibility and rich functionality. Also, it integrates a short circuit 
isolation circuit which is automatically activated and disconnects the defective node from the remaining 
loop, allowing it to be located by the panel.
The detector sends to the main panel an analogue value which depends on the concentration of smoke. 
The value is 100 in concentration of 0.107dB/m (small amount of smoke) and increases proportionally to 
120 in concentration of 0.300dB/m.
By default the panel is set to sound an alarm when the concentration of smoke is 0.107dB/m. The user 
can change this setting from the panel for each detector and define any level of smoke concentration 
between  the  lower  and  the  upper  limits,  specifying  the  sensitivity  of  the  system  depending  on  the 
requirements of each site.
They are composed by two parts. A plastic base which is placed on the ceiling and the main body of the 

o

detector which fits on the plastic base with a simple rotation to the right. The detectors have a 360  visible 
led and a remote led driver which are light up constantly in case of detection of fire, till cancelled from the 
panel. Also, they are staying lit even if the sirens are silenced from the panel, so the detector which 
detected the alarm is visible. They are turned off only when a reset command is given from the panel. The 
indicator led blinks every 10 sec indicating the connection status with the main panel.

Analogue addressable optical smoke detector

with integrated isolator

Thank you for your trust in our products  

Olympia Electronics - European manufacturer

INDICATORS

OUTPUT

MAXIMUM LOOP CURRENT (Ic max, -L in/out)

MAXIMUM SWITCH CURRENT (Is max, -L in/out)
MAXIMUM SERIES RESISTANCE (Zc max, -L in-out)

MAXIMUM LEAKAGE CURRENT
IN ISOLATION MODE (I max, -L in/out)

L

 

ISOLATION VOLTAGE (Vso min-max)

RECONNECT VOLTAGE (Vsc min-max)

DEGREES OF COVER PROTECTION
PRODUCED IN ACCORDANCE WITH

OPERATING TEMPERATURE RANGE
RELATIVE HUMIDITY

CONSTRUCTION MATERIALS

EXTERNAL DIMENSIONS

TYPICAL WEIGHT
GUARANTEE

1A
5A

IP42

EN 54-7, EN 54-17

300mΩ

10.2 - 13

8.8 - 11

Up to 95%

ο

-40 to 70  C 

ABS/PC

160 gr.

103 (d) x 48 (h) mm

2 years

Remote LED driver

Alarm LED

25mA pulses (6ms duration every 2sec)

SMOKE CONCENTRATION SENSITIVITY

MAIN VOLTAGE

STANDBY CONSUMPTION

ALARM CONSUMPTION

TECHNICAL CHARACTERISTICS

195μΑ

12-30V DC

2.5mA (with activated LED)

Adjustable from 0.107 to 0.300 in 0.010 dB/m steps

COMMUNICATION PROTOCOL

Olympia A Protocol

Page 4 from 4

WARRANTY

WARRANTY

Olympia Electronics guarantees the quality, condition and operation of the goods. The period of warranty 
is  specified  in  the  official  catalogue  of  Olympia  Electronics  and  also  in  the  technical  leaflet,  which 
accompanies  each  product. This  warranty  ceases  to  exist  if  the  buyer  does  not  follow  the  technical 
instructions included in official documents given by Olympia Electronics or if the buyer modifies the goods 
provided or has any repairs or re-setting done by a third party, unless Olympia Electronics has fully 
agreed to them in writing. Products that have been damaged can be returned to the premises of our 
company for repair or replacement, as long as the warranty period is valid.
Olympia Electronics reserves the right to repair or to replace the returned goods and to or not charge the 
buyer depending on the reason of defection. Olympia Electronics reserves the right to charge or not the 
buyer the transportation cost.

HEAD OFFICE

72

nd

 km. O.N.R. Thessaloniki-Katerini

P.C. 60300 P.O. Box 06 Εginio Pierias Greece

www.olympia-electronics.gr
[email protected]

921615500_09_003

BSR-6155

Analogue addressable optical smoke
detector with integrated isolator

1293

EN 54-7,                                                      20
EN 54-17
DoP: 921615500_59_001

EGINIO
PIERIAS
60300 
GREECE

20

1293

Reviews: