background image

Bandit

Drum Smoker

Model No. CM160-367

 

Drum style smoker for delicious slow cooking and smoking

 

Smoke generous amounts of food on the three 425mmØ chrome plated cooking racks 

 

Durable high temperature powder-coated solid steel 2.5mm door and 2mm firebox

 

Removable water bowl to add moisture while cooking

 

Large capacity removable charcoal pan makes clean-up easy

 

Built-in hanger for smoking

 

Heavy-duty door mounted temperature gauge 

 

Cool-touch handles

 

Sturdy saw horse leg design with heavy-duty steel wheels

 

Assembled dimensions (mm): 670 W x 1090 H x 670 D

5314-05/21

FOR OUTDOOR USE ONLY 

 

DO NOT

 OPERATE THIS APPLIANCE BEFORE READING THE INSTRUCTION BOOKLET  

DO NOT

 PLACE ARTICLES ON OR AGAINST THIS APPLIANCE 

DO NOT

 STORE CHEMICALS OR FLAMMABLE MATERIALS OR SPRAY AEROSOLS NEAR THIS APPLIANCE

DO NOT

 OPERATE THE APPLIANCE INDOORS 

DO NOT

 OPERATE IN AN ENCLOSED AREA. ACCESSIBLE PARTS MAY BE VERY HOT. KEEP YOUNG CHILDREN AWAY.  

MINIMUM CLEARANCES FROM COMBUSTIBLE MATERIALS: 3 METRES

Important:

 Retain these instructions for future use.

is a registered trademark of: Sitro Group Australia Pty Ltd - www.sitro.com.au & Aber Living, Hamilton, N.Z - www.charmate.co.nz            

Summary of Contents for Bandit CM160-367













Reviews: