58
6. CORRECTION
7. EXT
TERMINAL
8. INITIAL
1. LOCAL TIME
CORRECT
2. GPS AZIMUTH
3.MAP
CORRECT
4. BOAT POSI
CORRECT
5. TEMP
CORRECT
1.INITIALIZE
MENU
2. INITIAL
CORR VALUE
3 INITIAL
MEMORY DATA
4. INITIAL ALL
5. SIMULATION
6. PICTURE
STYLE
7. SPECIAL
MENU
1.MAP CORRECT
2.LAT CORRECT
3. LON CORRECT
4. CORRECTED
VALUE TO 0
5. MOVE C/POINT
TO BOAT
1. BOAT POSI
CORRECT
2.LAT CORRECT
3. LON CORRECT
4. CORECT VAL TO 0
5. MOVE TO C/POINT
1. LIGHT HOUSE
FLASH
2. WAYPOINT
RECALLMEMORY
Menu item
Meaning of setting
※
is at factory setting.
Correct local time. Designate with [CENTER]key
9:00
Set GPS Azimuth (Real Azimuth, Magnetic
Azimuth), and Magnetic variation.
Designate whether map is corrected or not.
OFF: not correct ON: correct
Designate corrected value of latitude. Select with
[CENTER] key left/rightwards. 0.00
Designate corrected value of longitude. Select with
[CENTER] key left/rightwards. 0.00
Set corrected value of above 2 & 3 to 0.
Move cursor position to own boat position.
Designate whether own boat position is corrected or
not. OFF: not correct ON: correct
Designate corrected value of latitude. Select with
[CENTER] key left/rightwards. 0.00
Designate corrected value of longitude. Select with
[CENTER] key left/rightwards. 0.00
Set corrected value of above 2 & 3 to 0.
Move own boat mark to cursor position.
Designate corrected value of water temp. Select
with [CENTER] key left/rightwards.
(Water temp. sensor is option.)
Set NMEA output
OFF: Not output ON: Output
Initialize all contents of which are set on menu.
Initialize each corrected value only.
Initialize all stored contents like event mark and
waypoint mark.
Initialize all above 1
〜
3. In order to execute
initialization, turn the Power OFF once and then
turn the Power ON.
Select whether GPS simulation mode/fish finder
simulation mode is shown or not.(
→
page 16)
OFF: Not show ON: Show
FIX: Own boat is fixed.
MOVE: Own boat moves.
Select display style according to direction of
installing the main unit. (
→
page 15)
LANDSCAPE
Set lighthouse flash. ON
When you put the power OFF and put the power
ON again while waypoint is set, select whether the
waypoint setting is stored or not. OFF
Summary of Contents for HE-6801
