Honda Electronics HE-6801 Operation Manual Download

Page: 10 / 108

5. HANDLING OF GPS ANTENNA

DANGER

●

Work on the board is too unstable and risky.

Installation and maintenance of GPS antenna should be done after you land

and fix the boat.

Unless you keep it, human damage resulting in death or serious wound will

occur.

WARNING

●

Do not install it simply.

It causes to the accident like human damage.

CAUTION

●

GPS antenna should be mounted at the highest position on the boat to

maximum satellite reception.

Obstacles near the antenna will shield it from satellite. Then the time of satellite

reception will increase or positioning accuracy will become worse.

4. HANDLING OF REMOTE

DANGER

●

Do not use leaked battery. (When using wireless remote)

When leaked liquid stains on body, it causes to damage.

※

In case of staining, wash out with clean water immediately.

CAUTION

●

Keep at the place where it will not drop due to vibration ,etc. when it is not used.

It causes to accident like human damage.

Summary of Contents for HE-6801













































































































Search results

Summary of Contents for HE-6801

Reviews:

Related manuals for HE-6801

Brands by name

Popular brands

Honda Electronics HE-6801, Operation Manual

Search results

Summary of Contents for HE-6801

Reviews:

Related manuals for HE-6801

Brands by name

Popular brands