TO SET WAYPOINT NAVIGATION
Setting of waypoint navigation
When you set the waypoint navigation, from own
boat’s position to waypoint
is connected by line,
and latitude/longitude of waypoint, distance,
bearing and estimated time of arrival from own
boat’s position to waypoint are shown on the upper
left of screen.
Press [WP RECALL] key.
Enter number of waypoint with [NUMBER] key.
※
It is also done by stacking cursor on waypoint
mark instead of.
By pressing [SET] key, waypoint navigation is set.
1
2
3
Note ) Following conditions are necessary when you set the waypoint navigation.
・
Latitude/Longitude of own boat’s position should be shown on the screen.
・
Waypoint should have been already set.
SET key
WP RECALL key
NUMBER key
37
WP SAVE key
Setting of Simple Waypoint Navigation
By pressing [CURSOR ON/OFF] key, cursor is
indicated.
Move cursor to point to be waypoint with
[CENTER] key.
By pressing [WP SAVE] key for a long time, simple
waypoint is set.
※
Simple waypoint is temporary waypoint. Data is
not left in unit.
1
2
3
CENTER key
CURSOR ON/OFF key
Summary of Contents for HE-6801
