1-4. TFT LCD Panel
●
Installation inside the hull with adhesive should be done while you
ventilate well inside the boat.
Volatile gas from solvent or etc. causes to toxic symptoms.
●
When you work using electric tools, please keep your hands dry.
It causes to electric shock.
●
When you pull out or insert the plug of transducer, please be sure to
turn the power switch off.
●
As TFT LCD panel is made with high precision technology, over 99% is
effective pixel but less than 0.1% pixel is lacked or there exists pixel light
always. It is not trouble. Please understand it in advance.
When he engine starts to run, voltage of battery varies heavily. It may affect
to the unit. Put the power switch off when you start to run the engine.
1-5. Caution on operation
Please operate the unit at 11-14VDC if power supply voltage.
Power supply 11-14V
Put the power switch off when you start to run engine
Do not clean the unit with organic solution like thinner, alcohol or etc. as
some parts of unit and panel are coated or made by plastic. In case it is too
dirty, soak the soft cloth in synthetic detergent and clean with it after
wringing well.
Prohibited organic solution
3
