4-2-5. Installation on the transom
Dead rise
angle not
exceed 10
°
Parallel installation to the slope
Transom
Transducer
Dead rise angle
exceed 10
°
Install on the stripe
Stripe
Transom
Transom
Hull
Down tilt of trailing
edge 2-5
°
※
Fill with any gap with
putty.
When you install the transducer above the
hull of stern, air bubble attach transducer’s
surface easily and you can not get any echo
at high speed.
Transom Bracket
(Standard Component
of TD03)
Nut
Screw
Plain washer
Transducer
Install to the boat by
using 4 tapping screws.
Bottom
Transom
Installation kit
4-2-6. Installation on transducer (Thru-Hull)
Install as near center position of boat as possible.
TD26 (Option)
TD26 (Option)
10
