5
PAINTSTICK
®
EZ-TWIST
®
ENGLISH
Inner handle o-ring/quad ring
Outer end cap
Inner end cap and seal
Fillport
15.
Clean roller assembly components in warm water. Lubricate inner handle o-rings/quad rings, outer end cap, and inner end cap with petroleum
jelly. Put a small amount of petroleum jelly into the fill port.
Cleaning and Disassembling the
PAINTSTICK
®
EZ-TWIST
®
12.
Remove spacer from roller
cover.
13.
DO NOT REMOVE OUTER END
CAP WITH A SCREWDRIVER!
DAMAGE TO THE OUTER END
CAP CAN OCCUR.
14.
Remove outer end cap from
roller cover by inserting the
frame inside the roller cover at
a slightly cocked angle. Then
gently push to snap off the
outer end cap with the frame.
10.
DO NOT REMOVE INNER END
CAP WITH A SCREWDRIVER!
DAMAGE TO THE INNER END
CAP CAN OCCUR.
11.
Remove inner end cap from
roller cover by inserting the
frame at an angle into the
inner end cap about 1".
Pull gently towards you to
remove cap.
9.
Remove the roller cover from
the frame.
8.
Depress the PUSH TO REMOVE
tab. It will snap to remove the
outer end cap.
Summary of Contents for PaintStick EZ-Twist
Page 19: ......
