25
Once in the Diagnostic Mode, you can navigate to the next screen by pressing the right arrow in
the top right corner of the screen or go back to the previous screen by pressing the left arrow in
the top left of the screen. You can return to the home screen at any time by pressing the home
icon in the bottom right corner of the screen.
The first screen displays the following diagnostic information:
Flow Rate:
This is the current flow rate of water through the system in gallons per minute. If
water is not running, it will display 0.0 GPM.
Peak Flow:
This is the highest flow rate in gallons per minute recorded through the system since
measurement was last reset. To obtain more details, touch “peak flow” and it will display the date
and time at which this peak flow rate occurred. To reset the peak flow meter, select the icon in
the bottom right corner of this screen. The peak flow rate meter will be reset to zero. To return
to the main diagnostics screen without resetting the meter, press the diagnostics icon instead.
Totalizer:
This is the total volume of water in gallons (US) that have been treated by the system
since the totalizer meter was last reset. To reset the peak flow meter, touch “totalizer” and then
select the icon in the bottom right corner of the next screen. The totalizer meter will be reset to
zero.
The second screen displays when the last regeneration (flush cycle) occurred as well as the
software version that is used by your control valve.
The third screen indicates the number of flush cycles that the valve has done as well as the
average interval between regenerations (flushes) based on the last 4 cycles.
Daily Usage:
In this area, you can access daily water usage information for the past month. The
first screen allows you to see the average water usage by day of the week (use the > and < icons to
view other days of the week). Select a day of the week to see detailed water consumption data on
this day of the week for the last month.
The final Diagnostic Mode screen provides details as to how much water has been processed since
the last flush cycle and when the programming settings were last changed.
To exit the Diagnostics Mode, press the home icon in the bottom right corner of the screen.
MASTER SETTINGS MODE
The Master Settings Mode is designed for professional use only. Unless directed by a water
treatment professional familiar with the system, it is not recommended that any of the Master
Settings Mode settings be modified.