4
5
INSTRUCTIONS FOR USE
To reduce the risk of electric shock, this unit is equipped with a polarized plug (one blade wider than
the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not
change the plug in any way.
1. Plug into a 120 volt AC outlet.
2. To activate the Shiatsu massage action, press the power button once. To activate vibration
massage, press the vibration button once. To activate reverse function, press (Fig. 1).
3. Pressing both the power and vibration buttons once will activate Shiatsu and vibration combined.
To activate soothing heat with either massage, press the heat button. Massage heads will glow
red (Fig. 2). Allow a few moments for the heating action to warm up. When finished, press power,
vibration, or both.
Note:
For more intense massage, place hands in the comfort grip handles and gently pull forward
(Fig. 3).
MAINTENANCE
TO CLEAN
Unplug the unit and allow it to cool before cleaning. Spot clean only with a soft, slightly damp sponge.
Never allow water or any other liquids to come into contact with the unit.
• DO NOT immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, or strong chemicals that might or might not be flammable and/
or damaging to the product to clean.
• DO NOT attempt to repair the massager. There are no user-serviceable parts. For service, contact the
Consumer Relations telephone number listed in the warranty section.
TO STORE
Place massager in its box or in a safe, dry, cool place. Avoid contact with sharp edges or pointed objects
which might cut or puncture the fabric surface. To avoid breakage, do not wrap the power cord around the
unit. Do not hang the unit by the power cord.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: HoMedics is not responsible for any radio or TV interference caused by unauthorized modifications
to this equipment. Such modifications could void the user authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Fig. 1
Fig. 2
Fig. 3
