8
9
Instructions for Inversion
Massage Recliner Use
Your Inversion Massage recliner is designed to provide relaxation in a variety
of positions utilizing the easy lock levers on each side of the armrests. The ideal
position for optimum relaxation is one in which the feet are above the heart.
NOTE
: The Inversion Massage recliner design has a weight limit of
300 pounds. Persons exceeding this body weight should not use this
recliner.
• Before sitting in the Inversion Massage recliner, be sure it is in the complete
upright position by unlocking the levers and pulling the backrest forward until
it stops.
• Lock the recliner into the upright position by pushing the levers forward toward
the footrest.
• Sit in the chair, and lean back slowly. Sitting all the way back in the seat will
make it easier to recline. To adjust the angle of the chair, hold on to the
armrests and lean back or forward until you reach the desired position.
Lock the position into place by pulling the levers back towards your head.
• The footrest may be raised by pulling it upward. Each position will sound with
a click. To lower the footrest, raise it until it stops and then push it back
towards the floor.
• Before getting out of the Inversion Massage recliner, be sure to return it to its
full upright position and lock into place.
• Stand up using the armrests for support.
Tip: To help you recline, slowly raise your hands above your head and lean
back. Lock in your desired position with the easy lock levers. To sit upright,
unlock the levers and move hands slowly towards your knees while leaning
slightly forward. This will bring the recliner back to its full upright position.
Power Adaptor Instructions
Connect the adaptor jack to the massage cushion’s power receptacle located
along the right side of the cushion. Once inserted, plug
the other end into an AC power outlet. Use only the AC power adaptor provided
with this unit.
AC Power Adaptor Information
Your massage cushion is powered by an attached custom AC home adaptor.
Use only the supplied AC home adaptor as other similar-looking adaptors may
cause irreparable damage to the unit and will void your warranty.
Massage Cushion and
Hand Control Instructions
Press the POWER button once to activate the hand controller.
A corresponding LED light will illuminate to indicate the power is ON.
To deactivate, press again.
Heat
To activate the heat function, your back must first be pushed against the
cushion. Once resting comfortably, press the HEAT button once.
The L.E.D. above the heat button will light indicating the heat is on.
NOTE
: When selecting the heat feature with massaging action, there will be a
slight decrease in the strength of the massage output. This adjustment is normal
and should not be interpreted as a defect.
Massage Strength
Use this function to customize the intensity of your massage. The intensity will
increase with each press of the strength button providing three levels: low (L),
medium (M), high (H). To change the intensity from high to low, press the button
again.
Massage Speed
Use this function to customize the speed of each massage cycle. The speed will
increase with each press of the speed button providing three levels as well;
low (L), medium (M), high (H). To change the speed from high to low, press the
button again.
Massage Styles and Target Zone Options
Choose from 8 massage functions. To activate, press the desired function
button. You can move from one style to another by simply depressing the button
of another style. You can further customize your massage by targeting body
zones and varying the speed and intensity within each style.
