15
Place the Treadmill on a level surface then set it to run at approximately 6-8 km/h. Observe the
running belt deviation to the right or left.
If the belt is drifting to the right, unplug the safety
lock and power switch, and turn the right
adjusting bolt 1/4 turn clockwise, then insert the
power switch and safety lock, run the Treadmill
and observe the running belt deviation condition.
Repeat above steps until the running belt rolls
nicely in the middle.
See picture A
If the Treadmill belt is drifting left, then repeat the
steps above steps until the belt is centered.
See
picture B
The Treadmill belt tension will gradually relax
after a prolonged period of use. In this case,
unplug the safety lock, and turn off the power.
Then turn the two adjusting bolts, one on each
foot clockwise 1 / 4 turn. Then turn on the safety
lock and power and run the Treadmill. Stand on
the belt to confirm the tightness. Repeat the
above steps until the belt reaches moderate
tightness.
See picture C
EXPLODED DIAGRAMS
Summary of Contents for FORCE HS212TM
Page 17: ...16 Parts List ...
