- 4 -
OPERATION:
1. Inspect the entire cabinet for any issues prior to use.
2. Prior to first use, install a protective window cover onto the inside of the cabinet. This
protects the safety glass from continual use.
3. The hole in the right upper side of cabinet is for installation of a dust collector or shop
vac. If you choose not to use a dust collector, keep this hole plugged. We recommend
the use of a dust collector or shop vac.
4. Attach Power Cord to switchbox on upper left side of Cabinet. Plug power cord into wall
outlet and turn to “ON” position to turn on light.
5. Place desired abrasive media in the bottom of Cabinet.
6. Place item to be cleaned onto the metal net.
7. Close and latch the top door.
8. Wear protective gear prior to operation. Never wear loose fitting clothes, injury may
occur.
9. Turn on air compressor.
10. Spray the item as needed.
11. Used media will continually recycle itself inside the cabinet.
12. Be sure to turn off air compressor and light after each use.
13. Maximum operating pressure is 120 PSI. Operating at higher pressure could result in
serious injury.
14. To change abrasive, remove plug at the bottom of cabinet and drain into a suitable
container. Replace the plug and pour new abrasive into cabinet.
15. The 1” hole with louver vent in the upper left rear of the cabinet provides for proper
venting of the product during use. Make sure intake filter is installed before operation.
16. The maximum media capacity is 7.4 liters. Do not overfill.
MAINTENANCE:
Powder Coat Finish
For heavy build-up of dirt and grime, our powder coat paint finish can be cleaned with spray
wax. Lightly spray the wax on the surface, and gently wipe with a soft, dry microfiber cloth.
Window cleaner and a soft cloth dampened with water can be used to clean the finish on a
regular basis.
Customer Satisfaction
All mechanical parts are inspected and adjusted for proper use before shipment; however,
there may be some shifting of parts during transit. Should any item not operate correctly,
please call customer service at 1-800-874-6625.
Summary of Contents for RD00920250
Page 11: ...11...
