Holzmann TS 315F-1500, User Manual

Page: 33 / 59

ASSEMBLY
HOLZMANN Maschinen Austria www.holzmann-maschinen.at Seite 33
Formatkreissäge / panel saw TS 315F-1500
4.2.3 Mounting the miter fence

Set the miter fence (A) into the hole on the sliding
table extension arm (B).

Attach it to the desired position with the fixing handle
(1)
4.2.4 Mounting of side countertops

The two lateral working plates (A) and (B) as shown in the
picture on the main plate attached with screws 1,2,3.

The suction hose bracket (D) is mounted on the worktop
(C) with the screws 4 and 5.
Adjust to the same height of the main table (B) and
countertops (E) and (C) with auxiliary rail (A) for flat-
ness.

After adjustment screws (C) and (D) firmly.
4.2.5 Installation of guide rail

The measuring scale (B) is fixed to the work surface (A)
with the screw (3).

The guide rail (C) is fixed with the screws 1 and 2.