Holzmann TS 315F-1500, User Manual

Page: 34 / 59

ASSEMBLY
HOLZMANN Maschinen Austria www.holzmann-maschinen.at Seite 34
Formatkreissäge / panel saw TS 315F-1500
4.2.6 Mounting of the rip fence

The sliding base (B) on the guide rail (C) postpone
careful

Secure the rip fence (A) to the sliding base (B)
4.2.7 Compensate sliding table

The sliding table (A) with the setting screws 1 and 5 for
concurrency and level with the main table plate (B) to
compensate.

The distance should be max. 3mm.
4.2.8 Adjustment of splitting wedge

Move the sliding table all the way to the left and remove the Allen screw.

Move the sliding table all the way to the right and remove the Allen screw on this page.

The two Allen screws on the riving knife holder can now be relaxed and the distance from
blade to gap wedge as shown in the picture can be adjusted.

Tighten the two Allen screws.
A B