Holzmann TS 315F-1500, User Manual

Page: 31 / 59

ASSEMBLY
HOLZMANN Maschinen Austria www.holzmann-maschinen.at Seite 31
Formatkreissäge / panel saw TS 315F-1500
amount Description
1 piec Main machine body
1 piec Sliding table
1 piec Carbide-tipped circular saw blade
1 piec Carbide scoring blades
1 piec Side arm
1 piec Table extension
1 piec Fence
1 piec Miter gauge
1 piec Miter
1 piec Hoods attachment
1 piec Cover
4.1.2 Workplace
Choose a suitable place for the machine. Observe the safety requirements of Chapter 2 and the
dimensions of the machine from Chapter 1.
The selected location must ensure as well as the possibility for connection to an extraction sys-
tem a suitable connection to the electrical grid.
Make sure that the floor can support the weight of the machine. The machine must be leveled
on all bases simultaneously.
You must also secure around a distance of at least 0.8 m around the machine. Before and be-
hind the machine must be provided the necessary distance for the supply of long workpieces.
4.1.3 Transport / unloading the machine
You need a forklift or pallet truck with the necessary bearing capacity.
 Parked in a horizontal stable position the machine with the four leveling jacks.
4.1.4 Preparation of the surface
Eliminate the preservative, which is applied for corrosion protection of the parts without paint-
ing. This can be done with the usual solvents. Here no nitro solvent or similar means, and in no
case use water.
N O T E
The use of paint thinners, gasoline, corrosive chemicals or abrasive cleaners will result in
damage to the surface!
Therefore:

When cleaning, use only mild detergent