OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
25
SB163VH
6.
Mounting the lever for setting the drilling
spindle speed.
Tighten the lever for setting the drilling
spindle speed.
7.
Mounting the spindle guard
Fasten the spindle guard cover with
two screws to the bracket.
Push the spindle protection holder
through the switch housing.
Fix with hexagon socket screw and
spacer washer.
8.
Mounting/removing the drill chuck
Degrease all parts.
Use a rubber hammer to fix the drill
chuck with a careful blow (1
st
picture
far left).
To remove the drill chuck again, extend
the spindle and turn it until you can
attach the drift wedge.
Remove drill chuck with a careful blow
(2nd picture left).
15
OPERATION
W A R N I N G
Always disconnect the machine from the power source and secure it against
unintentional reconnection before carrying out any conversion or adjustment
work!
C A U T I O N
When drilling workpieces with uneven surfaces, use suitable support pads!
Never start the drilling machine with the drill pressed down!
N O T E
Before each use, check that the safety devices are in perfect condition.
Check the screw connections for tightness at least once a week.
Regularly check that the warning and safety labels on the machine are in
perfect and legible condition.
