SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
14
PDB3200
12.3
Safety devices
The machine is equipped with the following safety devices:
•
Pressure relief:
For setting the max. working pressure
12.4
General safety instructions
To avoid malfunctions, damage and health hazards when working with the machine, in addition to
the general rules for safe working, the following points must be observed:
•
Check the machine for completeness and function before starting. Only use the ma-
chine if the separating and other non-separating protective devices required for machin-
ing have are fitted.
•
Make sure that the guards are in good working order and properly maintained.
•
Mount the machine securely to the woodworking machine being used to prevent it from
lifting off or falling over when feeding.
•
Ensure sufficient space around the machine.
•
Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects.
•
Ensure a clean working environment.
•
Keep the area around the machine free of obstacles (e.g. dust, chips, cut-off workpiece
parts, etc.).
•
Remove tool keys and other setting tools before switching on the machine.
•
Check the machine's connections for strength before each use.
•
Never leave the running machine unattended. Switch off the machine before leaving the
working area and secure it against unintentional or unauthorized restarting.
•
The machine may only be operated, maintained or repaired by persons who are familiar
and who have been informed about the dangers arising from this work.
•
Ensure that unauthorized persons keep a safety distance from the machine and keep
children away from the machine.
•
Always work with care and the necessary caution and never use excessive force.
•
Do not overload the machine.
•
Hide long hair under hair protection.
•
Wear close fitting protective work clothing and suitable protective equipment (eye pro-
tection, dust mask, ear protection, safety-shoes, work gloves only when handling tools).
•
Never wear loose jewellery, loose clothing or accessories (e.g. tie, scarf).
•
Do not work on the machine if you are tired, not concentrated or under the influence of
medication, alcohol or drugs!
•
Do not use the machine in areas where vapours of paints, solvents or flammable liquids
represent a potential danger (danger of fire or explosion!).
•
Shut down the machine and disconnect it from the compressed air supply, before ad-
justment, changeover, cleaning, maintenance or repair work, etc. Before starting work
on the machine, wait until all tools or machine parts have come to a complete standstill
and secure the machine against unintentional restart.
•
Warning signs and/or stickers on the machine that are illegible or have been removed
must be replaced immediately!
12.5
Special safety instructions for woodworking machines
•
Refer to the operating instructions of the woodworking machine used
•
Make sure that the pressure beam and the workpiece are free of lubricants and generally
in a clean and dry condition.
•
Keep all body parts away from the working area of the pressure beam during operating
process.
•
The max. working pressure must never be exceeded.
•
If air-pressure loss is noticed immediately stop the wood-working machine.
