HOLZMANN MASCHINEN KAM 50M, User Manual

Page: 28 / 35

MAINTENANCE
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at Seite 28
MOBILES KANTENANLEIMGERÄT / EDGE BANDING MACHINE KAM 50M
15 MAINTENANCE
A T T E N T I O N
Don’t clean or do maintenance on the machine while it is still connected
to the power supply:
Damages to machine and injuries might occur due to unintended
switching on of the machine!
Therefore: Switch the machine off and disconnect it from the power
supply be-fore any maintenance works or cleaning is carried out
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
Before first operation as well as later on every 100 operation hours you should lubricate all con-
necting parts (if required, remove beforehand with a brush all swarfs and dust).
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
The good condition and perfect adjustment of the guiding rollers is essential for a smooth band
guidance and a clean cut.
Store the machine in a closed, dry location.
N O T I C E
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a
pre-requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
15.1 Changing knives
 Remove screw N (fig.4) and the screws P (fig.6)
 Separate the knife holding body from the machine (fig.9)
 Remove the band guide Q , deflektor R and rear knife S (fig.10)